Climate Change Monitoring
How close is Jena to achieving its own climate target?
In 2021, the city set itself the ambitious target of becoming climate-neutral by 2035. To this end, the Climate Action Plan was adopted in 2023.
A climate protection monitoring scheme is used to document and communicate Jena’s progress towards climate neutrality on an annual basis. To this end, the city is now using the digital climate protection monitoring programme ClimateView:
About Jena’s climate protection monitoring (ClimateView)
Monitoring: What is it and why is it needed?
Climate protection monitoring involves collecting and analysing data to continuously measure, over the long term, the impact of the City of Jena’s climate protection activities.
Long-term climate protection targets include
- reducing electricity and heat consumption in households, the commercial sector and the public administration,
- a reduction in energy demand in private transport, and
- the promotion of renewable energy and combined heat and power.
Accordingly, available data from the buildings, transport and industry sectors is collected and analysed.
Since 2007, the city has been regularly recording energy consumption and greenhouse gas emissions and documenting these in monitoring reports. The monitoring reports from 2019 to 2023 can be found in the downloads section. You are welcome to request older reports via the contact details provided.
With the Climate Action Plan (CAP), it has become necessary to implement adapted monitoring that is aligned with the specific targets and measures of the CAP.
Digital climate protection monitoring with ClimateView
The ClimateView online platform presents climate protection monitoring in a transparent and easily understandable way. Interested parties can quickly gain an overview of the state of climate protection in Jena.
The annual energy and greenhouse gas balance sheet continues to form the basis for climate protection monitoring. This is now compiled using ClimateView. An emissions inventory records all available energy data for the city, allocates it to the sectors of buildings, transport and industry, and finally calculates the greenhouse gas emissions.
What exactly does ClimateView show?
Greenhouse gas emissions from the city of Jena
The results of the assessment are presented in ClimateView under the ‘Emissions’ menu on the website in charts covering the period from 2009 to the current reporting year. In addition, the emissions reduction pathway (also known as the reduction path) targeted under the Climate Action Plan up to the year 2035 is shown.
Municipal climate protection measures
The ‘Measures’ menu on the website provides an overview as well as detailed information on the 73 measures in the Climate Action Plan. The current status of implementation for these measures is also shown here.
Further development
There are plans to gradually expand the information on the platform. Key indicators illustrating developments in climate protection are to be added, and the emissions reduction pathway is to be linked to the climate protection measures.
Monitoring 2024
The results of the 2024 energy and greenhouse gas inventory are now available on ClimateView. According to these figures, the City of Jena’s greenhouse gas emissions in 2024 stood at 489,000 tonnes. Compared with 2019 – the base year of the Climate Action Plan – this represents a reduction of 75,000 tonnes, or 13 per cent. However, emissions are still above the climate neutrality scenario, which sets a target of 432,000 tonnes for 2024.
The trends in the individual sectors – buildings, transport and industry – are shown in ClimateView.
When interpreting the 2024 monitoring results, changes to the data set and calculation methodology compared with previous years in the buildings/industry and transport sectors must be taken into account. These changes are as follows:
Revised data set for the buildings and industry sector
- For the first time, the municipal utility was able to break down electricity consumption between residential, commercial and industrial buildings based on actual consumption figures. Until 2023, the breakdown for reporting purposes had to be based on Germany-wide average figures. This more accurate recording has led to significant changes in electricity consumption between the residential and commercial sectors, as well as to improved data quality.
- For the first time, consumption figures for non-pipeline-delivered fossil fuels such as oil, coal or biomass have been extrapolated using chimney sweep data from four of Jena’s five chimney sweep districts dating from 2025. Previously, only data from one chimney-sweeping district dating from 2014 was available. As a result, consumption figures for these fuels have changed compared with previous years, but are now based on a more accurate data set.
Revised data set for the transport sector
- To estimate fuel consumption, vehicle registration figures for Jena and the average annual mileage for individual vehicle types and propulsion systems are used. The data is provided by the Federal Motor Transport Authority. The Authority has changed the methodology used to determine annual mileage. As a result, the average figures are significantly lower than in previous years.
- In the freight sector, vehicles are categorised more precisely by class and type of propulsion. A distinction is made between light commercial vehicles, lorries in the categories up to 7.5 tonnes, over 7.5 tonnes and tractor units. For light commercial vehicles, a further distinction is made by type of powertrain (diesel, petrol, electric, gas). For the individual vehicle classes, the average annual mileage figures from the Federal Motor Transport Authority are used. This more differentiated data collection and the revised methodology for calculating annual mileage have resulted in significant deviations in the calculated emissions in this area compared with previous years.
Answers to specific questions
Will there still be monitoring reports in future, alongside the ClimateView online platform?
The plan is to continue producing an annual monitoring report on the Climate Action Plan, which will summarise the information on the platform and provide further details on selected topics.
In ClimateView, the sectors are labelled differently from those in the KAP or previous monitoring reports – why is that?
The emissions inventory, and thus the greenhouse gas balance in ClimateView, is structuredin accordance with the Global Protocol for Community-Scale Greenhouse Gas Inventories (GPC) [PDF] and is divided into the sectors of buildings, industry and transport. This structure ensures that the inventory complies with international standards for emissions accounting and enables a systematic approach to the categorisation and reporting of emissions.
The previous sectoral breakdown in the Climate Action Plan (KAP) and earlier monitoring reports complies with the German accounting standard for local authorities (BISKO). The structure of the two standards can be linked as follows:
| Climate Action Plan (BISKO) | ClimateView (GPC) |
|---|---|
| Private households | Buildings / Housing |
| Industry, retail, services | Buildings / Non-residential buildings |
| Transport | Transport |
| Industry | Industry |
What are emission factors?
An emission factor indicates how much greenhouse gas is produced by a particular activity or per unit – for example, per litre of petrol, per kilowatt-hour of electricity or per kilometre travelled. It helps to make it easier to calculate CO₂ emissions and to compare different activities with one another. Example: The emission factor for diesel describes how much CO₂ is released when one litre of diesel is burnt – this makes it possible to calculate, for example, how much CO₂ a car emits when it has travelled a certain number of kilometres. By contrast, the emission factor for electricity can also be used to calculate how much CO₂ a battery-powered car emits when it has travelled the same distance as the diesel car.
In Germany, emission factors are primarily calculated and regularly published by government bodies such as the Federal Environment Agency and scientific institutes.
What is the reason for the slight discrepancies between the emission figures in ClimateView and the greenhouse gas inventories published to date in the monitoring reports?
There are several reasons for the slight differences, each amounting to around 2 per cent of total emissions. Firstly, ClimateView’s emissions inventory allows for a more detailed breakdown of energy consumption from fossil fuels for heating. This results in a more nuanced application of emission factors. Furthermore, the calculation of emissions in the transport/freight sector was retrospectively adjusted to the ClimateView standard for all inventories from 2019 onwards. With regard to the breakdown of energy consumption across the individual sectors, the municipal utilities were able to provide more accurate data retrospectively from 2019 onwards for district heating and gas. Finally, retrospective adjustments to individual emission factors frequently lead to retrospective corrections to the balance sheets.
In principle, individual calculation methods have been replaced by standardised ClimateView procedures wherever possible.
What is an emissions inventory?
The ClimateView emissions inventory provides a comprehensive picture of all greenhouse gas emissions from a local authority across the buildings, transport and industry sectors over the course of a year. The annual greenhouse gas balance is calculated using the data from the emissions inventory. By analysing the emissions inventories over several years, it is possible to track the trend in greenhouse gas emissions in Jena and thus highlight the success or existing gaps in climate protection measures.
What does ‘CO₂-eq’ mean?
Carbon dioxide equivalents (CO₂-eq) are a unit of measurement used to make the climate impact of different greenhouse gases comparable. It is not only carbon dioxide (CO₂) that harms the climate, but also other gases such as methane (CH₄) and nitrous oxide (N₂O). However, these have a greater impact than CO₂.
To make it easier to compare them, a calculation is made to determine how much CO₂ would be required to have the same climate impact. The unit of measurement for this result is called CO₂-eq.
What does the Jena climate neutrality target mean?
In 2021, the City Council resolved that Jena should become climate-neutral by 2035. This means that Jena will only emit as many greenhouse gases as can be offset by natural sinks – such as forests – or other technical measures.
However, the calculations underpinning the Climate Action Plan had already shown as early as 2023 that, despite ambitious targets and the consistent implementation of the proposed measures, Jena is likely to still be emitting residual energy-related emissions of around 100,000 tonnes of CO₂-eq in 2035.
At the same time, greenhouse gas accounting currently does not take into account non-energy-related emissions from land use, forestry, waste management and consumer behaviour. For these areas of accounting, there is still a lack of reliable data specific to Jena, as well as a lack of uniform calculation standards.
Why are the future emissions shown in the ‘Emissions’ section of ClimateView higher than the reduction pathway set out in the Climate Action Plan?
When transferring the individual measures and target parameters of the Climate Action Plan into the ClimateView platform, it became clear that binding specific target values for 2035 had not yet been defined for all areas. Furthermore, it is not possible to estimate the expected emission reductions for all climate protection measures. This applies in particular to measures which the city cannot implement directly itself.
To project future greenhouse gas reductions in local authorities, ClimateView has developed a specialised impact logic that transparently illustrates this gap in achieving the targeted emission reductions.
As part of the first evaluation of the Climate Action Plan, scheduled for the end of 2026, the target assumptions and climate protection measures for Jena are to be further developed using ClimateView’s impact logic, thereby closing the gap as far as possible.
What are the transition elements mentioned in the ClimateView action descriptions?
Transition elements are universal building blocks in ClimateView that describe specific climate action options. At the heart of every transition element is a shift from one activity to another that meets the same need. Every shift is quantifiable and describes a way of reducing emissions and resource consumption.
Examples of transition elements:
- Switching from natural gas heating systems to heat pumps in detached houses
- Shifting from combustion-engine cars to cycling and walking
In ClimateView, the measures in the Climate Action Plan are linked to transition elements so that their contribution to emissions reduction can be estimated.
How can I work out my personal carbon footprint?
The concept ofthe personalcarbon footprint was popularised by the oil company BP in 2004. Through a marketing campaign, the company introduced a calculator for determining one’s personalcarbon footprint. In doing so, it effectively shifted the blame for greenhouse gas emissions onto individuals or the general public, thereby diverting attention from the responsibility of the oil companies.
Effective climate protection requires global, comprehensive solutions. Nevertheless, every single person can make a contribution to protecting the climate. Using the Federal Environment Agency’s CO₂ calculator, you can, in just a few minutes, gain an overview of the areas of your personal life where there is still scope to reduce greenhouse gas emissions.